深圳市众安科电子有限公司
五金通金牌会员 第15年
已通过企业工商认证
公司服务热线
13600183990
消防验厂开关按钮 非编报警按钮 手动报警 多线系统配件
消防按钮是人为触发报警，将信号传输到控制主机，主机自动启动声光警铃。
每个防火分区应至少设置一个手动火灾报警按钮。从一个防火分区内的任何位置到X邻近的一个手动火灾报警按钮的距离不应大于30m。手动火灾报警按钮设置在公共活动场所的出入口处，具体设置部位如下：大厅、过厅、主要公共活动场所出入口；餐厅、多功能厅等处的主要出入口；主要通道门厅等经常有人通过的地方；值班人员工作场所。声光报警或警铃作为警报装置安装在手报的上方。
通用型传统手报报警按钮
规格：
工作电压范围： 24VDC
报警电流:10-30 mA @ 24 VDC
工作湿度范围：相对湿度10 ％-93％ ，不凝结
工作温度范围： -10 ° C-50 ° C（14 °F-122°F）
C
Conventional Manual Call Point, Operates by Advanced MCU Expert Algorithm Software.
Key Specifications/Special Features
They work perfectly with all conventional intelligent fire control panels
Thesb116 is a conventiona
General
Technical Specifications
Ordering Information
Individual(1 units)
Dimensions
(w x d x h millimetres) Weight
140x105x45 220g
Dimension: 140mmX105mm
Height: 45 mm
Weight: 220 g
Operating Temperature Range: -10°C to 50°C
Operating Humidity Range: 10% to 93% Relative Humidity, Noncondensing
Latching Alarm: Reset by momentary power interruption
Top Side
Figure 1. Dimension of manual call point:
Electrical Ratings
System Voltage (nominal): 24 VDC (9V~ 28VDC)
Standby Current: 60 μA @ 24VDC
Alarm Current: 10~30 mA @ 24VDC
l call-point based upon our industry standard series housing, and features easy to install, push-fit wiring terminals.
The unit can support either a Frangible Glass element or a Non Frangible Plastic element.
Push in and Pull Down Call Point
Can be reset by key
Red colour
Fire proof materials
470 Ohm Resistance
Modern style Call Point
